Unger nLITE Pole Accessories | Hoses and Adapters

Pole Accessories

Accessories for Unger nLITE poles

These accessories allow you to connect, configure, transport and maintain Unger nLITE poles used in pure water cleaning systems.

In this category, you will find angle adapters, hoses, flow regulators, connectors, tool adapters, transport bags and other spare parts for different generations of nLITE poles.

Before buying an accessory, always check the pole range, handle shape, hose diameter and type of connection used.

nLITE Angle Adapters

Angle adapters allow you to position the brush in relation to the pole when working on sloping glass, overhangs, glazed terraces, frames and other hard-to-reach surfaces.

Different systems are available depending on the pole family:

  • nLITE Angle Adapter: designed for PrecisionGrip-shaped poles, such as Carbon Composite and Carbon 24K.
  • nLITE Connect Angle Adapter: compatible with the round aluminium, HiMod and Ultra HiMod nLITE Connect handles.
  • HiFlo MultiLink Adapter: pre-assembled plastic adapter, adjustable and stable, for certain nLITE Connect configurations.

Angle kits may consist of different parts and lengths. Check the pole reference before selecting the adapter.

Tool Adapters

Tool adapters allow certain tools to be attached to an nLITE pole.

Depending on the model, they may provide a thread for brushes or allow classic window-cleaning tools, such as compatible Window Washers and Window Squeegees, to be attached.

Not all adapters are suitable for every generation of handle. The pole shape and connection system must be checked.

Carbon 24K Extension Adapter

The nLITE extension adapter connects the main Carbon 24K CF86G handle to its first extension and allows the hose's internal routing to be maintained.

It is a specific part of the Carbon 24K system and should not be confused with the couplings used by the nLITE Connect ranges.

nLITE DuroFlex Hoses

The DuroFlex hoses connect the nLITE pole to the pure water filter.

The range includes different versions:

  • Standard hose: approximate diameter of 5/8 mm.
  • High-performance hose: approximate diameter of 7/10 mm, intended for configurations requiring a higher flow rate.

The choice depends on the total length, required flow rate, filtration equipment and connections installed.

Hose Clips and Connections

The clips guide the hose along the outside of the pole and keep it tidy during work.

Quick connections, reducers and joining pieces are also available for adapting hoses of different diameters. Before combining them, check the measurements indicated for each reference.

Flow Regulators

Flow regulators allow you to open, close or adjust the water flow near the pole without having to move to the filtration system.

The HiFlo Control can be attached to handles with an approximate diameter of between 20 and 70 mm and allows the flow rate to be controlled in compatible hoses.

The nLITE flow regulator is integrated into certain configurations with DuroFlex hose and allows the water flow to be adjusted during work.

HiFlo Soap Dispenser

The HiFlo soap dispenser allows detergent to be added to the circuit when a particular job requires a cleaning stage using a product.

When detergent is added, the process is no longer cleaning carried out solely with pure water. It may subsequently be necessary to rinse the surface properly with pure water to prevent residue.

nLITE Transport Bags

The bags allow poles, brushes, hoses, adapters and small parts to be transported in an organised manner.

Bags are available for different generations of the system:

  • nLITE NLBAG: space for up to five handles, two brushes, one hose, one angle adapter, one extension adapter and accessories.
  • nLITE Connect NLBA1: nylon bag for more than five handles, two brushes, one bracket, one hose and small parts.

The two bags should not automatically be considered compatible with the same ranges. Check the measurements and system generation before choosing.

Spare Parts for Previous Systems

This category may include parts for previous nLITE systems, such as CarbonTec components or other spare parts.

These parts must only be used with the references for which they were designed. They should not be used as extensions for the current Carbon Composite, Carbon 24K, HiMod or Ultra HiMod ranges unless compatibility is expressly indicated.

If you need help identifying an accessory, you can call us on 627 588 844.

 Show Moreexpand_more
 Show Lessexpand_less
Adaptador HiFlo MultiLink
HiFlo MultiLink Adapter
Unger plastic angle adapter for connecting the pure water brush to aluminium nLITE, HiMod and Ultra HiMod poles. Pre-assembled and ready to use, with an adjustable angle and stable construction. The most economical adapter option for these ranges. For greater performance and durability, see the nLITE Connect angle adapters. Reference FTGOS.
€7.61
Dosificador de detergente
Detergent dispenser
Unger detergent dispenser for pure water cleaning systems. It is installed in the hose system and mixes soap with pure water or mains water before it reaches the brush — essential for windows with heavily adhered dirt where pure water alone is not enough. Simple connection to standard garden hoses, easy filling and adjustable mixing control. Recommended for any pure water system. Reference HCDEU.
€49.87
Juego manguera HiFlo 100 Mts.
HiFlo Hose Set 100 m
100-metre roll of Unger HiFlo hose with a 5 mm internal diameter for nLITE pure water systems. Includes a male hose trolley adapter and female handle adapter. The solution for installations with long distances between the HydroPower system and the work area. Reference PH10Y.
€106.93
Hiflo Control
HiFlo Control
HiFlo Control Unger flow controller for pure water-fed poles with yellow nLITE hose. Attaches directly to the pole handle with a quick-release fitting — compatible with handles from 20 to 70 mm in diameter. Allows the water flow to the brush to be opened and closed from the working position without having to go to the equipment. Compatible only with yellow nLITE hose — not suitable for green DuroFlex hose. Reference TMOOV.
€36.30
Unger nLITE Connect HFNLC Traditional Tool Adapter
Adapter for nLite tools
Unger adapter that adds a standard thread to aluminium, HiMod and Ultra HiMod nLITE Connect poles for attaching traditional tools — window washers, squeegees and scrapers. Allows the pole to be used for conventional cleaning without pure water. Different from the NLCLA — this model is specifically for nLITE Connect poles. Reference HFNLC.
€8.60
Adaptador angular nLite
Unger nLITE Angle Adapter
Unger nLITE angle adapter for connecting the pure-water brush to composite carbon and 24K carbon poles. Available in three lengths: 15 cm, 42 cm and 82 cm. FastLock system for changing the brush in seconds and adjusting the angle in 45° increments without twisting. Compatible with Power nLITE brushes. Not compatible with nLITE Connect poles (HiMod, Ultra HiMod). Brush not included.
€25.19
Details View details  
Adaptador angular nLite
nLITE Connect Angle Adapter
Unger nLITE Connect Angle Adapter for connecting the pure water brush to the telescopic pole. Available in three lengths: 15 cm, 42 cm and 82 cm. FastLock system for changing the brush in seconds and adjusting the angle in 45° increments without twisting during cleaning. Compatible with nLITE Connect poles and Power nLITE brushes. Brush not included.
€25.19
Details View details  
Adaptador de extensión
Extension adapter
Essential Unger nLITE extension adapter for connecting the first CF33G extension to the CF86G main handle in the 24K carbon system. It is secured to the bottom of the main handle and receives the first extension. Only one NLHCC per pole is required — subsequent extensions fit directly into one another without an additional adapter. Reference NLHCC.
€60.56
Manguera DuroFLex
DuroFlex Hose
25-metre Unger DuroFlex hose for high-level pure water cleaning systems. High flexibility without pinching that blocks the water flow, with greater rigidity than conventional hoses for improved handling on site. Includes an aluminium connector for direct connection to HydroPower Ultra and RO equipment. Compatible with nLITE flow regulators and angled adapters. Reference DLS25.
€63.19
Details View details  
Manguera DuroFLex
DuroFlex High-Performance Hose
Unger DuroFlex DLH25 25-metre hose for high-level pure water cleaning systems. High-performance version with a 10 mm diameter (7 mm internal) for a higher flow rate. Highly flexible, with a kink-free design to prevent the water passage from closing, and more rigid than conventional hoses for easier handling on site. Includes an aluminium connector for direct connection to HydroPower Ultra and RO equipment. Compatible with nLITE flow regulators and angle adapters. Reference DLH25.
€126.47
Unger nLITE Connect Hose 25 m | Pure Water
nLITE Connect Hose
25-metre Unger nLITE Connect Hose for connecting the nLITE pole to the pure-water production system.

Length: 25 metres.
Standard version.
Compatible with Unger nLITE Connect systems.
Includes an aluminium male connector for the water filter.
Unger reference: NL25G.
€39.04
Elemento HiFlo CarbonTec 1,5 mt
HiFlo CarbonTec 0.75 m Element
0.75-metre spare element for previous-generation Unger HiFlo CarbonTec water-fed poles, which are now discontinued. Very limited stock — one of the last available spare parts for this product reference. If you have an older CarbonTec water-fed pole and need to replace a damaged element, call us before placing your order to confirm availability: 627 588 844 / 605 193 932. The item is a single 0.75-metre element. The photos are for guidance only.
€195.00