Ninja Scrapers

Unger ErgoTec Ninja Scrapers for Glass Unger ErgoTec Ninja scrapers are designed to remove stuck-on residue from glass and other compatible surfaces when conventional cleaning is not sufficient. Their main feature is the 2-in-1 system, which allows the working angle of the head to be changed between 0° and 30° using a mechanism integrated into the handle. ErgoTec Ninja 2-in-1 Scraper The scraper can be used with the head straight at 0° or angled at 30°, adapting the blade position to the type of work and access to the surface. It is available in two widths:10 cm: suitable for smaller areas and more precise work. 15 cm: covers a larger surface with each stroke.The handle also allows the scraper to be attached to compatible Unger telescopic poles using the Locking Cone system. Premium Stainless Steel Blades The ErgoTec Ninja is supplied with a Premium stainless steel blade designed for professional glass scraping. The blades are available in 10 and 15 cm and can be replaced when they become blunt or damaged. Plastic Blade for Ninja For certain jobs on sensitive surfaces, there is also a 15 cm plastic blade compatible with the Ninja scraper. This type of blade allows stuck-on residue to be removed using a less aggressive material than a metal blade. Before scraping a delicate surface, always check that the material is compatible and test it in an inconspicuous area. ErgoTec Ninja Holster The specific holster allows the scraper to be carried on a belt and keeps the blade protected when the tool is not in use. The EasyClip system allows the scraper to be inserted into and secured in the holster quickly while working. Scraper and Holster Combination Unger also offers the ErgoTec Ninja Combo, which combines the scraper and holster in a single set. The holster is compatible with different 10 and 15 cm scrapers and can hold both straight and angled models. Correct Use of a Glass Scraper Before using a blade on glass, check that both the surface and the blade are clean and in good condition. Always work on a sufficiently moistened surface and avoid using a damaged or rusty blade, or one with residue that could mark the glass. If you are unsure which scraper or blade to use, you can call us on 627 588 844.