Telescopic Poles

Professional Unger nLITE telescopic poles for high-level cleaning Professional Unger nLITE telescopic poles allow you to work with pure water systems on windows, façades and other elevated surfaces from the ground. The range includes different materials and levels of rigidity. The choice mainly depends on your usual working height, frequency of use, system weight and the level of control required over the brush. What pole length do you need? The physical length of the pole and the actual working height are not exactly the same. The reachable height also depends on the operator’s height, the position of the surface, the working angle and the accessories fitted. As a general guide, the different ranges can be configured for the following approximate working heights:Aluminium: up to approximately 9 metres. Carbon Composite: up to approximately 10 metres. Carbon 16K: up to approximately 12.3 metres. Carbon 24K: up to approximately 15.3 metres. HiMod: up to approximately 17 metres. Ultra HiMod: up to approximately 20 metres.The maximum configuration depends on the main handle, the extensions supported and the manufacturer’s instructions for each system. nLITE aluminium poles Aluminium poles are a strong, cost-effective option for low and medium working heights. Their greater weight compared with carbon makes them particularly suitable when initial cost is a priority or when working continuously at great height is not required. nLITE Carbon Composite poles Carbon Composite poles combine carbon and glass fibres, offering a middle ground between aluminium and the stiffer carbon ranges. nLITE Carbon 16K poles Carbon 16K poles are designed for professional use and allow work with configurations of up to approximately 12.3 metres. nLITE Carbon 24K poles Carbon 24K poles offer greater rigidity than Carbon Composite and are designed for medium and high-level work. Depending on the configuration used, they can reach an approximate working height of 15.3 metres. nLITE HiMod and Ultra HiMod poles The HiMod and Ultra HiMod ranges are designed for high-level work where pole rigidity and control are particularly important. HiMod can be configured for working heights of up to approximately 17 metres, while Ultra HiMod can be configured for heights of up to approximately 20 metres. Which telescopic pole should you choose?Aluminium: for moderate heights and a lower initial investment. Carbon Composite: a middle-ground option in terms of weight and rigidity. Carbon 16K: for regular professional use at medium heights. Carbon 24K: for greater rigidity and work at higher levels. HiMod: for high-level work and greater brush control. Ultra HiMod: for the highest configurations in the range.Compatibility with pure water systems The poles in this section are designed to work with brushes, hoses and accessories compatible with the Unger nLITE system. They can be used with DI, Nano and reverse osmosis systems using the appropriate connections. See our recommended pure water kits if you need a combination of filter, pole, brush and accessories. If you are unsure about the suitable length or material, you can call us on 627 588 844.