Complete Unger HydroPower Kits | DI and RO Systems

HydroPower Kits

Complete Unger HydroPower kits for pure water cleaning

HydroPower kits bring together the pure water production equipment, telescopic pole, brush, hose and the main accessories needed for the job in one complete set.

They are configured with compatible components and allow you to choose the system according to the filtration type, pole material and usual working height.

The exact composition varies depending on the model. Before purchasing, always check the product details to confirm the filter, pole length, brush, hoses, connections and included accessories.

HydroPower kits with DI filtration

DI kits use HydroPower Ultra filters with ion-exchange resin. They operate when connected to a water supply with sufficient pressure and do not require an electricity supply or their own pump.

These systems are simple to install and maintain. Resin life depends mainly on the hardness of the incoming water and the amount of pure water used.

DI entry-level kit with Carbon Composite

The entry-level kit combines a HydroPower Ultra S filter with an Unger nLITE Carbon Composite pole, brush, hose and compatible accessories.

It is intended for low- to medium-height work and for users looking for a complete set with a compact DI system.

DI kits with Carbon 16K

Kits with a Carbon 16K pole offer lower weight and greater rigidity than Carbon Composite configurations.

They are designed for regular professional use and can combine HydroPower Ultra filters with different capacities and telescopic poles of up to approximately 12,30 metres, depending on the selected model.

DI kits with Carbon 24K

Kits with a Carbon 24K pole are intended for medium- and high-level work where greater rigidity and brush control are needed.

Depending on the configuration, they may include a HydroPower Ultra L or LC filter and a Carbon 24K pole in different lengths, with a main handle and compatible extensions.

The maximum height depends on the number of extensions and the specific configuration stated on each product page.

HydroPower kits with RO reverse osmosis

RO kits include electric reverse osmosis equipment that removes a large proportion of the minerals from the water before the final treatment.

They are mainly intended for frequent use, areas with hard water or jobs requiring a larger quantity of pure water to be produced.

These systems also require maintenance and consumables, such as pre-filters, membranes and final resin where applicable.

HydroPower RO S kit with Carbon 24K

The kit with HydroPower RO S combines compact reverse osmosis equipment with a Carbon 24K pole, brush, hose and accessories.

The RO S has one working outlet and is designed for professionals who need continuous pure water production in a compact configuration.

HydroPower RO M High Rise kit

The RO M High Rise kit combines HydroPower RO M equipment with a HiMod pole and the corresponding extensions.

It is intended for professional work at great heights where high pure water production and a more rigid pole are needed.

HydroPower RO M Sky Rise kit

The RO M Sky Rise kit includes HydroPower RO M equipment and an Ultra HiMod pole configuration prepared to reach working heights of up to approximately 20 metres.

It is a solution intended for high-level work where flow rate, pole rigidity and brush control are particularly important.

What does a HydroPower kit include?

Depending on the product reference, a complete kit may include:

  • HydroPower Ultra filter or RO reverse osmosis equipment.
  • Telescopic pole with water-fed system.
  • Unger nLITE brush.
  • Angle adapter.
  • Hose for carrying water to the pole.
  • Compatible connections, regulators or adapters.
  • Initial resin, pre-filters or other consumables, depending on the equipment.

Although they are complete sets, they may require a suitable water supply, an electricity supply for RO models or a specific connection for the customer's installation.

Which kit should you choose?

  • DI with Carbon Composite: for moderate heights and a simple system without electricity.
  • DI with Carbon 16K: for regular professional use and lower weight.
  • DI with Carbon 24K: for greater rigidity and work at greater heights.
  • RO S: for frequent use, hard water and one working outlet.
  • RO M High Rise: for higher production and work with a HiMod pole.
  • RO M Sky Rise: for Ultra HiMod configurations of up to approximately 20 metres.

Your choice should be based on water hardness, frequency of use, required production and usual working height.

If you are unsure which kit best suits your work, you can call us on 627 588 844.

 Show Moreexpand_more
 Show Lessexpand_less
Unger DIUK1 pure water starter kit — Ultra S 6 m aluminium pole
Unger Aluminium Starter Kit
Unger starter kit for pure water cleaning with a HydroPower Ultra S DI resin system and 6-metre AN60G aluminium pole. The lowest-cost option for starting to work with pure water. The pole can be extended to 9 metres by purchasing the AN30G extension handle separately. Includes a 27 cm soft nLITE brush, articulated angle and 20-metre hose. Reference DIUK1.
€656.34
Kit básico DI 6 Mt
Unger Composite Carbon Starter Kit
Unger starter kit for pure water cleaning with a HydroPower Ultra S DI resin system and a 6-metre composite carbon pole. The most economical option for starting pure water cleaning at heights of up to 6 m. Includes an nLITE Power Brush 28 cm with open-ended bristles, a 25 m DuroFlex hose and a 15 cm nLITE angled adapter. The hose can be extended with a second DuroFlex if a greater distance from the system is needed. Reference DINK1.
€820.16
HydroPower Ultra L/LC Unger 24K Kit — DI resins, up to 16.2 m
Unger Expert Kit L and LC 24K — up to 16 m
Unger HydroPower Ultra kit with a 24K carbon water-fed pole for pure water cleaning. DI resin filtration system. Available without a trolley (Ultra L) or with a trolley (Ultra LC), and in 3 working heights: 8.6 m, 11.9 m or 16.2 m. The higher heights are achieved by adding extension pole sections to the 8.6 m main pole. Includes 24K water-fed pole, nLITE articulated elbow, 28 cm nLITE Power brush and 25 m DuroFlex hose.
€1,663.27
Details View details  
Unger RO S Carbon 24K Kit RONK1 — 11.80 m pure water system
Basic RO 11.9 m Kit
The RO S Carbon 24K Kit is Unger’s entry-level pure water system with reverse osmosis. It includes the HydroPower RO S (180 l/h + 1,000 l/h Boost Mode), an nLITE Carbon 24K pole with up to 11.80 metres of reach, a complete 41 cm nLITE Power Brush and a 25 m DuroFlex hose. The most accessible way to adopt reverse osmosis technology with a mid-to-high-quality carbon pole.
€5,178.50
Unger RO M High Rise Set RONK2 — system up to 13.4 metres
Unger RO M HIGH RISE HiMod 13.4 m Kit
The RO M High Rise Set is the reverse osmosis pure water system configured for high-level work at heights of up to approximately 13.4 metres. It includes the HydroPower RO M (350 l/h, 2 membranes), a high-modulus nLITE Connect HiMod carbon pole with master handle and 2 extensions, a complete 41 cm nLITE Power Brush and a 25 m DuroFlex High-Performance Hose. The choice between the basic RO kit and the Sky Rise Ultra HiMod for buildings of 4–5 storeys.
€8,346.60
Unger RO M Sky Rise Ultra HiMod Kit RONK3 — up to 20 m reverse osmosis
Unger RO M Sky Rise Ultra HiMod 20 m Kit
Unger RO M Sky Rise Ultra HiMod Kit RONK3 — the most advanced pure water system for working at great heights. HydroPower RO M reverse osmosis system with 350 l/h, nLITE Connect Ultra HiMod water-fed pole reaching up to 20 metres, 41 cm nLITE angled brush and 25 m DuroFlex High-Performance hose. The ultimate kit for large-building façades requiring maximum reach and maximum flow rate.
€10,433.51
HydroPower Ultra Unger L/LC 16K Kit — DI resin, 10 m or 12.4 m
Unger Expert Kit L and LC 16K Up to 12.5 m
HydroPower Ultra Unger kit with an nLITE 16K carbon pole for professional cleaning of façades and windows at height. DI resin filtration system. Available in a version without a trolley (Ultra L) or with a trolley (Ultra LC), and with 2 pole lengths: 10 m or 12.4 m. Includes nLITE 16K pole, nLITE 16K elbow, 25 m DuraFlex hose and 27 cm nLITE brush.
€1,539.68
Details View details