Unger Expert Kit L and LC 24K — up to 16 m
Unger HydroPower Ultra kit with a 24K carbon water-fed pole for pure water cleaning. DI resin filtration system. Available without a trolley (Ultra L) or with a trolley (Ultra LC), and in 3 working heights: 8.6 m, 11.9 m or 16.2 m. The higher heights are achieved by adding extension pole sections to the 8.6 m main pole. Includes 24K water-fed pole, nLITE articulated elbow, 28 cm nLITE Power brush and 25 m DuroFlex hose.
How long will the resin last with your water?
Enter your actual ppm or select your area to get an estimated guide to litres, working hours and surface area.
Calculator range: 1–2,000 ppm.
The area value is an approximate reference, not a measurement taken at your property.
At this ppm level, a HydroPower DI system may be uneconomical for regular use. We recommend considering a reverse osmosis system such as the Unger RO S.
Unger reference: incoming water TDS 275 ppm, output <10 ppm; laboratory values and approximate coverage. Values between reference points are calculator estimates, not an official Unger table.
Vídeos del producto
Mira el producto en funcionamiento antes de decidir.
local_shipping ENVÍO GRATIS en pedidos de +75€ antes de IVA Sólo península (excepto en promos especiales informadas)
local_shipping ENVÍO EXPRÉS Realizamos nuestros envios mediante mensajería 24/48 horas. Algunos artículos pueden tener un plazo de entrega superior +INFO
HydroPower Ultra L/LC Unger 24K Kit — DI resin system with carbon water-fed pole for up to 16.2 m
The HydroPower Ultra L/LC 24K kit combines the HydroPower Ultra DI resin system with Unger's 24K carbon water-fed pole. Available without a trolley (Ultra L) or with a trolley (Ultra LC), and in three working heights depending on the number of extension pole sections.
Without trolley (L) or with trolley (LC)
Ultra L (without trolley) — without the transport trolley. Includes a straight 28 cm NFK28 Power brush.
Ultra LC (with trolley) — with a transport trolley for greater convenience when moving the equipment. Includes a 28 cm angled NFR28 Power brush.
3 working heights — starting from the 8.6 m main pole
The three available heights are achieved using the same 8.6 m CF86G main pole, adding CF33G extension pole sections:
Up to 8.6 m — main pole only. For façades of up to 2–3 storeys.
Up to 11.9 m — main pole plus 1 CF33G extension. For façades of up to 3–4 storeys.
Up to 16.2 m — main pole plus 2 CF33G extensions. For façades of up to 5 storeys.
Kit contents by version
All versions include the HydroPower Ultra system, the CF86G 24K carbon main pole, the CF33G extension pole sections required for the selected height, an nLITE articulated elbow, a 28 cm nLITE Power brush and 25 m DuroFlex hose.
The hose can be extended with a second DuroFlex hose and the connection kit if a greater distance is needed between the system and the working area. Call us on 627 588 844 / 605 193 932 for advice on which version best suits your work.
- Composición pértiga
- Fibra de Carbono
- Altura de trabajo
- Hasta 16 metros
- Sistema de filtración
- Resinas
- Alimentación eléctrica
- Sin alimentación