8.6 m Extendable Starter Kit
Unger pure water cleaning starter kit with the HydroPower Ultra S DI resin system and an 8.6 m 24K carbon water-fed pole. The pole can be extended up to 11.90 m or 16.20 m by adding extensions — without losing your initial investment. Includes an additional resin replacement, 28 cm soft nLITE Power brush, 25 m DuroFlex hose and 15 cm nLITE angle adapter.
How long will the resin last with your water?
Enter your actual ppm or select your area to get an estimated guide to litres, working hours and surface area.
Calculator range: 1–2,000 ppm.
The area value is an approximate reference, not a measurement taken at your property.
At this ppm level, a HydroPower DI system may be uneconomical for regular use. We recommend considering a reverse osmosis system such as the Unger RO S.
Unger reference: incoming water TDS 275 ppm, output <10 ppm; laboratory values and approximate coverage. Values between reference points are calculator estimates, not an official Unger table.
local_shipping ENVÍO GRATIS en pedidos de +75€ antes de IVA Sólo península (excepto en promos especiales informadas)
local_shipping ENVÍO EXPRÉS Realizamos nuestros envios mediante mensajería 24/48 horas. Algunos artículos pueden tener un plazo de entrega superior +INFO
Unger KR002 pure water starter kit — HydroPower Ultra S with extendable 24K carbon water-fed pole
The KR002 kit is Unger's starter kit for professional pure water cleaning. It combines the HydroPower Ultra S DI resin system with the 8.6-metre 24K carbon water-fed pole — a complete system for getting started straight away, with the advantage that the pole can be extended in future without needing to replace it.
HydroPower Ultra S — DI resin filtration
The HydroPower Ultra S filters mains water through deionisation (DI) resin to produce ultrapure water. With a 6-litre resin capacity, it produces approximately 600 litres of pure water in areas with medium water hardness — enough to clean around 600 m² of surface area. The kit includes an additional resin replacement as well as the resin supplied with the system.
24K carbon water-fed pole — extendable without losing your investment
The 24K carbon water-fed pole has a working height of 8.6 metres and can easily be extended in future:
Up to 11.90 m — by adding one CF33G extension section.
Up to 16.20 m — by adding two CF33G extension sections.
The oval design of the pole section provides a better grip and prevents twisting between sections even if a clamp becomes loose.
Kit contents
1x HydroPower Ultra S with standard resin.
1x Additional premium resin replacement.
1x 8.6 m 24K carbon main section.
1x 15 cm nLITE angle adapter.
1x 25 m DuroFlex hose.
1x 28 cm soft nLITE Power brush with 2 water jets.
Call us on 627 588 844 / 605 193 932 for advice on whether this kit is suitable for your type of work and the water hardness in your area.
- Composición pértiga
- Fibra de Carbono
- Altura de trabajo
- Hasta 9 metros
- Sistema de filtración
- Resinas
- Alimentación eléctrica
- Sin alimentación
